This heavy duty industrial track is roll formed from 16 gauge hot dipped galvanized steel. 90 degree bend can be adjoined to straight sections of 16RT Roller Track with the connectors that are included no splicer required. The track is bent on a 2 foot radius. This section is ready to be installed to a beam, or suspended by chain, using mounting plates welded to track. It is rated to support loads of up to 100 pounds per linear foot if the load is evenly distributed between supports that are spaced 3 feet or less. The maximum load rating, if entire load is at one point midway between supports, is 175 pounds. The finish on this track is galvanized steel which assists in preventing corrosion. Track typically used in industrial applications where a priority is placed on length and function over appearance. Dimensions 1.48 in x 1.25 in.