Aluminum track bracket that is used to attach the 88001 Privacy Cubicle Track to the ceiling in a suspended configuration when the track can't be attached directly to the ceiling. The Track Adapter is attached to the 88001 Cubicle Track with a single screw (not included). The end of the 88200 Privacy Cubicle Suspension Tubing slips into the bracket, and is attached by sliding the set screw through holes you will drill to hold the track securely in place. The other end of the 88200 Suspension Tubing is attached to the track with an 88204 Ceiling Flange in a similar fashion. 1.15 in x .8 in x 1 in (extension off track). Silver - mill finish aluminum. Sold Individually. Compatible with 88200 Suspension Tubes, 88204 Ceiling Flanges, and 88206 Wall Brackets. Recommended spacing between supports is 3 to 4 feet. Each support typically requires a Ceiling Flange, Suspension Tube, and Track Adapter.